The genuine BMW M carbon-ceramic brake is a technique from racing, especially designed for F80 M3 & F82/F83 M4. Through the use of the high-tech recyclable materials carbon and ceramic, the thermal load capacity also increases in extreme situations such as on the racetrack. The weight reduction of the brake disc has a positive effect on the fuel consumption and the agility of the M vehicle. Its long service life even slows down wear. Depending on the situation, the carbon-ceramic brake offers a further increase in active safety compared to the M compound brake. As an optical distinguishing feature, the calipers are painted in gold.

You will also need to change the brake sensor when retrofitting the BMW M Carbon Ceramic brake kit.

• The sportiness of the vehicle is underlined by the attractive exterior appearance. Especially when fitted with light-alloy wheels with an open wheel design.
• Novel carbon fibre composite ceramic: As a result, the brake discs are much more resistant to wear and a change is much less necessary.
• Even more direct / spontaneous use of braking force under extremely high load due to high and stable friction coefficient.
• Highest heat resistance even with sporty continuous use.
• 60% lighter than conventional brake discs: The reduced unsprung weight reduces the weight of the chassis and improves the road contact of the wheels. Weight reduction of rotating wheel masses by 13.50 kg.
• More accurate metering of braking power and agility when cornering by reducing the mass moment of inertia.
• Even more resistance to decreasing braking effect due to high thermal load (fading) than in the standard built-6-piston fixed caliper brake with also ventilated and perforated Gußbremsscheiben.
• High corrosion resistance of the material and thus an extension of the life of the brake discs.
• The BMW carbon ceramic brake was designed and tested according to internal requirements.

Technical information

• Weight reduction of approx. 13.5 kilograms
• Novel carbon fibre composite ceramic
• The carbon-ceramic brake can only be combined with 19 "M light-alloy wheels (even with winter tires) due to the larger brake discs at the front.
• The retrofit kit corresponds to the SA 2NK (M carbon ceramic brake) and is code-relevant.

• Carbon ceramic brake discs front & rear
• Brake caliper housing front & rear
• Brake pads front & rear
• Brake booster
• Brake protection plates front axle
• various small fitting parts

F87 & F87 LCI

• M2 Coupe (2014+)
• M2 Competition Coupe (2018+)

When fitting on the M2 / Competition Coupe, the brake servo (provided in the kit) needs to be changed and software updated. This is also not a BMW recognised retrofit so there will not be any warranty provided when fitting it on a M2/M2 Competition.

To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number(UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.

34112358378

Manufactured by

BMW - Genuine BMW Performance Parts.